mark@willersfurniture.com / Ph: 416-689-8737

Plywood Coffee Table

Coffee table made from ply-offcuts and clear pine (33″w, 16″d, 18″h). This is very like the console table I built recently, except used some pine along with fir ply sections. Here are some photos taken during construction in the shop.

Mitered corners to be doweled and glued.

Top and sides clamped up for a few hours.

Lots of filling and sanding as the ply was pretty porous.

Trimming the face frames so that they’re flush with the top and sides.

Almost finished and ready for clear coating.

Leave a Reply